The lighting rules of LTE products.

10-23-2020
8663

Note: This Article Applies to:

  1. Archer MR200

Example: Sample picture of Archer MR200:

Part I. LED lighting rules during power on start process

  1. After the power is on for a few seconds, the Power light will keep flashing the white light (bright 0.5s/ off 0.5s) while all other lights will be off;
  2. After a while, the Wireless LED will stay white and Power LED will stay white after flashing for a while;
  3. The whole system is started and all LED lights are working normally

Part II. LED lighting rules after start-up

  1. Power LED:

• Single color(WHITE)

Status

Description

White On

The system has started up successfully.

Off

Power is off

White Flashing

The system is starting up or firmware is being upgraded. Do not disconnect or power off the router

  1. Internet LED:

• Single color(WHITE)

Status

Description

White On

The router is connected to the internet

Off

There is no internet connection

  1. Wi-Fi LED:

• Single color(WHITE)

Status

Description

White On

The wireless function is enabled

Off

WPS connection is in progress, and this may take up to 2 minutes.

White Flashing

The wireless function is disabled

  1. LAN LED:

Status

Description

White On

At least one LAN port is connected to a powered-on device.

Off

No LAN port is connected to a powered-on device.

  1. Signal Strength:

Status

Description

White On

Indicates the signal strength the router received from the mobile internet. More lit bars indicates a better signal strength.

Off

There is no mobile internet signal.