How to upgrade the ONT firmware from OLT side?

10-23-2020
158

Note: This Article Applies to: TP-Link GPON OLT P1201 Ver.1

 

The OLT can support to upgrade ONT firmware remotely, it could be useful for the ISP management. Here is the details about how to achieve that by CLI and EMS.

A: CLI

Step1. Transfer ONT firmware to OLT.

You need to upload the firmware to OLT firstly to make sure it’s available.

OLT(config)# load file {ftp <ip-address> < FTP-user-name> < FTP-user-password> < FILE-NAME>} | {tftp <ip-address> < FILE-NAME>}

For example:

OLT(config)# load file ftp 192.168.5.111 test test 111.tar

Step2. Select ONTs which need to be upgraded.

You can select ONTs which you want to upgrade by the below command.

OLT(config)# ont load select <FrameID/SlotID> {all | <port-id>}  {<ont-list> | all}

For example:

OLT(config)# ont load select 0/0 1 1-6                                                                                             

Number of ONTs that can be added: 6, success: 0

Step3. Start the upgrading.

After we select all the ONTs, we can start the upgrading. There are several activemode we can choose: graceful, immediate, next-startup.

OLT(config)# ont load start <FrameID/SlotID> <FILENAME > | activemode {graceful | immediate | next-startup}

For example:

OLT(config)# ont load start 0/0 111.tar activemode immediate 

Step4. Check the progress.

OLT(config)# show ont load info <FrameID/SlotID>

For example:

OLT(config)# show ont load select 0/0                                                                                              

-----------------------------------------------------------------------------                                                      

  F/S PON ONT ID  State      Progress                                                                                              

 ----------------------------------------------------------------------------                                                      

  0/0 3   1       waiting    0%                                                                                                     

-----------------------------------------------------------------------------                                                      

  Total: 1, waiting: 1, fail: 0, success: 0, loading: 0, cancel: 0     

B: EMS

The OLT can also support to upgrade the firmware by EMS management.

Please go to PON Card to open the Pon Card Management. Then enter the ONU upgrade Page.

Then input the FTP server information where you put the firmware in. Click Download to Device first.

After that, choose the ones you want to upgrade from the list and click Upgrade.